When you buy a new refrigerator for your family it is easy to assume that because of all the money you spent on it you are going to get quite a bit of use from it. From mostly running on ambient temperature in order to keep your food cold, to being equipped with a water filter which will eliminate impurities, many people like appliances because they are always ready when they need them. No wonder so many homeowners are changing out their aging refrigerators for brand-new options!
Changing Water Filter
If your Maytag refrigerator has a water filter, it’s time to replace it. Many people don’t realize that the filters can get dirty and need to be replaced on a regular basis. The easiest way to tell if your filter needs to be replaced is by checking the manufacturer’s instructions. If the filter isn’t getting dirt kicked up when it’s operated, it probably needs to be replaced. Filter numbers are usually located on the front or back of your refrigerator and you may also find a replacement online.
What is the Possible Reason for This Problem?
One common symptom of a water filter failure is noticeable odors coming from your refrigerator. In many cases, the problem can be traced back to sediment buildup in the water filter. If this problem isn’t corrected, it can lead to other problems, like food spoilage and decreased fridge efficiency.
The most common cause of sediment buildup in a water filter is poor water filtration quality. This means that the filter is not removing all of the contaminants found in your drinking water. Over time, this can lead to increased amounts of sediment in the water and eventual clogging of the filter.
If you notice an increase in odors coming from your refrigerator and believe that the water filter is to blame, it’s important to take action. One option is to have your water tested for contaminants to see if there’s an issue with your source. If there is no visible issue with your water, you may need to replace your filter. When replacing your water filter, be sure to choose one that specifically addresses sediment buildup and filtering quality.
Possible Causes of this Problem
If your Maytag refrigerator is not cooling or freezing, the most likely cause is a problem with the water filter. Here are some tips on how to change the water filter on a Maytag refrigerator:
1. Turn off the refrigerator and unplug it from the outlet.
2. Remove the front panel of the refrigerator by pulling outward on the handle near the top.
3. Find and remove the water filter holder by removing one screw (it’s usually in the back) and then pushing forward on the filter to release it.
4. Loosen and remove the two water filters (usually held in place by rubber bands). Be sure to replace both filters if they are not already replaced.
5. Replace the filters and screw holder, making sure they are properly seated before reversing all steps to reattach the front panel. Plug in your refrigerator and turn it on.
Suggestions for Improving
1. Test the filter every six months to ensure that it is still working effectively.
2. Use a water filter that is certified by the EPA or NSF. These filters typically remove more contaminants than other filters and are more expensive, but they are worth it in the long run.
3. Change the water filter if any of the following occur: the smell of chlorine becomes strong, sediment builds up in the water tank, or biofilter starts to clog frequently.
4. Empty and refill the water tank at least once a month to maintain good water quality and reduce the chances of bacterial growth.
His Opinion
Changing the water filter on a Maytag refrigerator can be a fairly simple job, but it is important to be sure that the correct filter is replaced. Checking the manual for your model can help with this, but generally speaking, the type of filter and its replacement will be noted there. A good rule of thumb to remember is that the sediment and carbon filters should be replaced every six months, while the chlorine filter should be replaced every three months.