Mold can grow on surfaces where they are damp, while some plants are heavy exudates and actually produce liquid water. With that in mind, it makes sense that the areas containing actual water are susceptible to mold growth. The first step in combating mold is to remove the source of the problem – you should check your drain lines for clogs and let them clean up and dry before watering again. Then you should wipe down the area around your bathtub or shower head with vinegar, setting a vessel such as a bowl under it so that you don’t have to touch any damp surface.
Basics of Mold
If you have noticed a strange patch of mold near your bathroom tub, there are a few things you can do to get rid of it. Before you start cleaning, make sure to evaluate the severity of the infestation. If it is just a small spot and does not seem to be spreading, simply using a scrub brush and water can clean it up. For larger patches, you will need to follow specific steps.
The first step is to determine if the mold is growing on fabric or wood. Mold that is growing on fabric should be removed with a cloth dampened with a mild soap solution and water. If the mold is growing on wood, use a sealant such asacetone or methyl chloridewhich will kill the mold but leave the wood unharmed. Both methods may require multiple applications over several days or weeks.
If you have determined that the mold is located on fabric or wood, the next step is to remove it using an effective cleaner. Cleaners that are safe for both fabric and wood include bleach, hydrogen peroxide, dishwashing soap and vinegar. Follow the instructions that are included with the cleaner to avoid damage to the surface. After cleansing, dry the area completely with a garden hose or press
Types of Mould
Mould is a complex and varied fungus that can grow in many different environments, so it can be difficult to know what kind of mould is growing in a particular place. While there are many different types of mould, some are more commonly associated with indoor environments, such as mould found on surfaces that come into contact with water, like the bathtub or shower.
There are several ways to identify and get rid of mould around the bathtub. You can use a mold detector kit to test for the presence of mold, or you can use a bleach solution to kill the mould. If you do not want to use either of these methods, you can try using a vacuum cleaner to suck out the mould. However, be careful not to damage the surrounding surface!
Causes of Mold
If you think that mold is just a problem around the home, you are wrong. Mold can be found almost anywhere there is moisture, including in the bathrooms.
Prevention and Removal Tips
When it comes to preventing mold and its harmful effects, it’s important to take preventative measures before anything bad can happen. Here are a few tips for keeping your bathroom clean and mold-free:
1. Clean your bathtub regularly. Scrub it with a mild cleaner or a patch of baking soda before each use. Combine one part vinegar to three parts water and use this solution to get tough stains out.
2. Keep the moisture levels low in your bathroom by closing off any leaky areas, such as the shower head, around your bathtub. This will help avoid moist conditions that favor mold growth.
3. If you do find mold growing, don’t panic. There are many ways to remove it without using harsh chemicals or damaging your bathroom walls or flooring. Try these tips:
a) Mix 1 part bleach to 10 parts water and spritz it over the suspected area; rinse well with clean water. Caution: Bleach can be harmful if inhaled or spilled, so be careful when using it!
b) Pour 2 cups of boiling water into the tub and wait five minutes; pour a cup of cold water over the top and allow it to stand
Conclusion
Mold is a common problem in homes, and it can be tough to get rid of. Fortunately, there are several ways to get rid of mold around the bathtub. Gratefully, most molds do not cause health problems unless they grow large enough to break through the surface of your skin. If you think you may have Mold near your bathtub, try one or more of these methods: