Do you want to change your bathroom from wood or from tile? If so, here’s a great article that showcases the lofting technique for installing the vinyl plank.
What Are The Requirements?
There are a few things you’ll need in order to install vinyl plank flooring in a bathroom.
First, you’ll need an area that’s at least 18 inches by 24 inches. Second, you’ll need to purchase the proper vinyl plank flooring pieces. Third, you’ll need to have a helper handy to help you measure and cut the plank sheets. And fourth, you’ll need some type of adhesive to attach the plank sheets together.
What To Prepare For Installation
If you’re thinking about installing vinyl plank flooring in your bathroom, there are a few things you’ll need to prepare for before starting. Here are the essentials:
-Space for the installation – This typically isn’t an issue in bathrooms, as they’re typically smaller than other areas of the house. However, if you have a large bathroom and don’t want to invest in a deep space for the flooring, consider mounting it on the wall instead.
-Plywood or Masonite – If you choose to install vinyl plank flooring on the ground instead of mounting it on a wall, you’ll need some sort of platform to work with. A plywood or Masonite base will give you plenty of support while still allowing you to move around easily.
-Vinyl plank flooring – Once you’ve prepared your space and gathered your materials, it’s time to start installing the vinyl plank flooring. It’s important to note that this type of flooring is quite sturdy and requires very little maintenance. That said, here are a few tips for keeping your floor looking great:
-Clean often – Vinyl plank floors don’t suffer
How To Install
Installing vinyl plank flooring in a bathroom can be an easy and affordable way to update your space. Here are some tips on how to install vinyl plank flooring in a bathroom:
1. Clean the surface where you plan to install the flooring. Use a cleaner and water to clean the area and remove any dust or dirt.
2. Measure the length and width of the area you will be installing the flooring in. Use the measurements to determine the size of plank you will need.
3. Mark the positions of the nails on both edges of each plank with a pencil or a piece of chalk. Drive the nails at a slight angle into the wood so that they are not visible from the front or back of the plank.
4. Place one plank on top of another, lining them up along the marks that you made with the nails. Drive additional screws into each joint to hold them in place.
5. Fit the second plank over top of the first and secure it with screws, again ensuring that there are no visible nails from either side. Continue this process until you have installed all of your planks.
6. If desired, add trim around
Cleaning Vinyl Flooring After It’s Installed
Vinyl plank flooring is a great way to add pizzazz and style to a bathroom, but like any other type of flooring, it needs to be kept clean in order to look its best. Here are a few tips for cleaning vinyl plank flooring:
-If the vinyl plank flooring is just being used for decoration, it can be cleaned with a damp cloth using mild soap. If the vinyl plank flooring is in use, however, it needs to be cleaned with a special cleaner specifically designed for vinyl floors.
-If the vinyl plank flooring has become stained, FIRST remove any existing furniture or objects from the area. Next, use a stiff brush to remove any loose dirt or dust. Finally, use a diluted cleaner solution to clean the surface. Be sure to rinse off the solution thoroughly before replacing any furniture or objects.
-If the vinyl plank flooring becomes stained after being installed, DO NOT clean it with soap or water. Instead, contact a professional restoration company in order to have the stain removed and the floor restored.