If you’re looking for a way to significantly cut the cost of your flooring project, this article is for you. Learn how important it is to measure more than just plywood in order to have enough wood to work with when cutting the floor out of your kitchen or another tight area.
The Remove Carpet And Install Laminate Flooring Process
If you have been considering replacing your carpet with a laminate flooring surface, there are a few things you will need to know before beginning. Laminate floors are a great option for those who want a durable and stunning flooring surface, but they do require some extra care in order to keep them looking their best. Here is a guide on how to remove carpet and install laminate flooring in your home:
1. Remove the Carpet: Start by taking off the old carpeting. You can use a vacuum cleaner and dust pan to get all of the dirt and debris up, or you can use a wire brush if you have one. Make sure to get under the corners and between the seams where it is difficult to access. Once the carpet is removed, you can start cleaning up any spills or messes that may have occurred.
2. Install Laminate Flooring: Once all of the mess has been cleaned up, it’s time to install the new laminate flooring. Begin by laying down a waterproof layer of sealer over the entire wood surface. This will help protect your new floor from moisture and damage during installation. Next, lay down
Common Procedures for Removing Carpet
Removing Carpet is a common task for most homeowners. In order to install laminate flooring, it is important to remove the old carpet before starting. Here are some common procedures for removing carpet:
-Steam Cleaning: Steam cleaning is a popular option for removing heavy soils and residue. To use this method, cover the area to be cleaned with a large piece of plastic and heat the carpet until steaming occurs. Move the plastic around to cover all areas of the carpet. Turn off the steam and use a vacuum cleaner to clean.
-Covington Method: The covington method uses a plunger to suction onto the carpet and pull. This method works best on low pile carpets. Begin by pulling up on one corner of the rug and then tug on opposite corner. Repeat until all corners are pulled up. Next, push down on one end of the plunger to suction and then push down on opposite end to release. Move plunger in circular motion over entire area being cleaned.
-Pneumatic Removal: The pneumatic removal system uses pressurized air to loosen and remove carpet. To use this system, first measure the dimensions of the
Common Procedures for Installing Laminate Flooring
If you have ever considered installing laminate flooring in your home, chances are good that you have been prompted to remove existing carpet before starting. While this task may seem daunting at first, it doesn’t have to be. In fact, there are a few common procedures that can help make the removal process smoother and easier.
First and foremost, make sure to gather all of the materials that you will need for the job- from saws and clamps to an appropriate glue and carpet cleaner. Once you have these items assembled, take a look at the area where you plan on installing the new flooring. If the room has preexisting trim or molding, be sure to remove any of these pieces before beginning the installation process.
Next, take care measure the distance between the wall studs and the edge of the carpet. This information will help you determine which size saw blade to use. Be sure to follow manufacturer’s guidelines when cutting into your carpet.
Once you have determined the size of saw blade that is required, start by cutting a hole in your existing carpet using the blade. Make sure to hold onto both edges of the cut while making it as smooth as possible so that dirt and debris don
Finishing Touches For Your New Floor
After you install your new laminate floor, there are a few final touches you should make to finish the job. Here are four tips to help:
1. Clean and vacuum your new flooring regularly. Dirt and dust will accumulate over time, causing the floor to look dull and dirty.
2. Protect your flooring from scuffs and scratches by using an antimicrobial pad on furniture legs and sharp edges around the room.
3. Keep pet hair under control by using a pet hair inhibitor on walking areas and frequently vacuuming up hairballs.
4. Protect your new flooring from fading and staining by applying a hardwood floor protector when the floor is first installed.
Cost Estimate
We have created a cost estimate for installing laminate flooring in a room. It is important to remember that the cost of labor and materials will vary depending on the size and complexity of your project. However, we have estimated a range of costs for a basic installation in a small room.
Caveat Emptor: This cost estimate is only an estimate, and should not be used to determine whether or not laminate flooring is the right option for you. The final cost of your project will depend on many factors, including the type of flooring you choose, the quality of the installation, and the specific needs of your room. Contact a professional installer to get an accurate quote for your specific project.
Materials:
– Laminate flooring (about $120 per square foot)
– Nails (about $1 per nail)
– Tension rod (about $8 per tension rod)
– Lumber (about $4 per linear foot)
– Pliers (about $4 per pair)
– Hammer (about $3 per hammer)
– Drill (about $30 per drill)
– Square or level (about $5