Losing the electricity to your refrigerator because of a faulty ice maker can often be a major inconvenience, getting you ready for what could be an even more expensive repair. Fortunately, this problem is taken care of with the manual you are about to read.
The Basics
If your Kenmore refrigerator ice maker is not making ice, there are a few things you can do to try and fix the problem. First, check that the auger is turning properly by trying to turn it manually. If the auger turns smoothly but the ice maker is not producing any ice, it may be time to repair the unit.
Occasional Troubleshooting
Kenmore Refrigerator Ice Maker Repair Manual
Occasionally, the Kenmore refrigerator ice maker won’t produce enough cubes to meet your needs. If this is the case, there are a few things you can do to troubleshoot the issue and get your ice maker back up and running.
Step by Step Guide to Repairing the Ice Maker
If your Kenmore refrigerator ice maker is not producing ice, the most likely and simplest repair is to replace the worn or defective components. This guide will outline the process for repairing a Kenmore ice maker, including step-by-step instructions and pictures. If you find that you are unable to fix your ice maker, or if it appears to be more complicated than this guide indicates, please consult a qualified repair technician.
presupposes that you have unplugged your refrigerator and removed all of the food and beverage containers. If your refrigerator does not have an on-off switch, locate the reset button (it may be concealed on the front panel) and turn off the main power supply. Disconnect all cables from the refrigerator before beginning any repairs.
To begin repairing your Kenmore ice maker, remove the cover by unscrewing two screws in the top corner (see photo). Be careful not to lose any of the attached wiring during this process.
Remove the four screws at the back of the machine (2 on each side), then slightly lift up on the front panel to free it from its clips.(see photo). It may help to rest a piece of cardboard under one end
Describe the main parts of your Kenmore refrigerator
Kenmore refrigerators typically have a single door on the bottom of the unit that opens to reveal a refrigerator inside. There are two main parts to the Kenmore refrigerator: the freezer and the fridge. The freezer section usually contains three compartments (the middle one is larger than the other two) and can hold a large quantity of food. The fridge section contains numerous shelves and can hold a lot of groceries.
The ice maker is located in the back wall of the fridge. It uses water to freeze an iceless block of ice which it then dispenses through a tube onto your breakfast bar or dinner table. If your Kenmore ice maker is not producing enough ice, you may experience poor quality drinks or poor cooling performance in your refrigerator. In most cases, fixing your Kenmore ice maker will require only a few simple repairs.
Parts you may need to fix your Kenmore ice maker include: The Water Tank, Ice Maker Motor, Ice Tray, Bracket, Harness, and water lines. The following instructions will provide step-by-step instructions on how to repair your Kenmore ice maker.
1) Remove the exterior cover by unscrewing the four screws located on each side near
Instructions for disassembling the ice maker inside your refrigerator
If you’re having trouble with your Kenmore refrigerator ice maker, there’s a good chance that it can be repaired. In this article, we provide step-by-step instructions for disassembling the ice maker inside your refrigerator. By following these instructions, you should be able to get your ice maker back up and running in no time.
First, turn off the power to your refrigerator and unplug the ice maker. Next, remove the front panel by unscrewing the four screws located near the top of the appliance. Be careful not to damage any of the wiring connections as you remove the panel. Once the panel is removed, you will see the ice maker assembly occupying most of the space inside the refrigerator.:
n
To repair your Kenmore ice maker, you will first need to take apart all of the components of the assembly. This includes the water reservoir, pump assembly, evaporation coil and condenser fan. Once all of these parts are separated from each other, it should be relatively easy to fix any issues that may have caused your machine to stop producing ice. Make sure to read through the installation and maintenance instructions that came with your machine before starting any repairs,
Attach/different hardware from your old ice maker in order to install your new one
The process of attaching and installing your new Kenmore refrigerator ice maker is simple and straightforward if you have the appropriate hardware. Here are a few items you’ll need: an ice maker bracket, a water supply line adapter (if your old ice maker had one), some new screws, and an ice maker installation kit.
To attach your new ice maker, first determine where it will be located on your refrigerator. The bracket that comes with your new ice maker will have measurements marked on it. You’ll also need to find the water supply line adapter, which should be near the bottom of your refrigerator. Once you have these two items, use the bracket measurements to mark the location of the screws on the wall inside your refrigerator. Use the installation kit to attach the bracket to the screws and then connect the water supply line adapter to the bracket. Finally, attach your new ice maker to the lines using the included screws.