The title of this article discusses when you would want to replace your refrigerator water filter to avoid wet flooring and the signature red residue left behind. The authors discuss the pros and cons of replacing your water filter at once, or replacing it after every 3 months. This article is a helpful guide for everyone!
Why does my Kitchenaid refrigerator filter need to be replaced?
A lot like most appliances in your home, your Kitchenaid refrigerator filter will eventually need to be replaced. There are a few main reasons why this happens. The filter will become clogged with food particles and bacteria, which will cause the refrigerator to run slower and make less noise. Additionally, the filters can also become contaminated with mold or other allergens. If you notice any of the following signs that your Kitchenaid refrigerator filter needs to be replaced, it’s important to do so as soon as possible:
-The refrigerator is running slowly or making strange noises
-The filter feels dirty or smells bad
-The fridge does not cool properly or feels warm
It may be helpful to consult a professional technician if you are unsure if your refrigerator needs a new filter or if the issue is more complicated than just a faulty filter. It’s always best to err on the side of caution and have your appliance checked out by a professional if you notice any concerning symptoms.
What is a refrigerator water filter?
A refrigerator water filter helps to remove lead, chlorine, and other contaminants from the water that goes into your refrigerator.
The filter is usually located on the side of the refrigerator.
If your fridge’s water filter needs to be replaced, be sure to follow these steps:
1) Turn off the refrigerator and remove the front panel.
2) Remove the filter cartridge.
3) Disconnect the water supply line from the refrigerator and attach it to a pail or sink.
4) Fill the pail with undrinkable water and attach it to the refrigerator’s water supply line.
5) Turn on the refrigerator and wait until the pressure has built up in the system before shutting off the water supply.
6) Replace the old filter with a new one and reconnect everything.
How to replace the Kitchenaid refrigerator filter
If you own a KitchenAid range with a water filter and you’re experiencing issues with water quality, it’s time to replace your filter. Here’s how to do it:
1. Turn off the power to the range by unplugging the cord from the electrical outlet.
2. Open the door on the front of the range and remove the filter cartridge by grasping it between your thumb and forefinger and pulling it out.
3. Put new cartridge in place by fitting it into bottom left hand corner and pushing it up until it clicks into place. Push back any excess debris that may have collected on the outside of the filter.
4. Turn on power to the range by plugging in cord and re-installing door handle.
Which Kitchenaid water filters are recommended for your fridge?
If you’re looking for a Kitchenaid refrigerator water filter, Consumer Reports recommends the FC-2 HEPA filter. It’s specifically designed to remove certain types of bacteria and protozoa from your water, which helps to keep your fridge smelling and tasting fresh.
If you’re replacing the filter, what can and cannot change with it?
The water filter in an appliance, such as a refrigerator, can affect the how effectively it operates. So when you’re replacing this filter, take into consideration the following:
-The filter should be of the same size and type as the original filter.
-Do not wash or dry the appliance until after the new filter is installed.
-Do not use harsh chemicals or abrasives to clean the appliance.
Conclusion
Replacing your Kitchenaid refrigerator water filter is an easy task that can help improve the quality of your ice and water. By replacing your filter, you will reduce chlorine and other contaminants from entering your machine, which in turn can improve the taste and clarity of both your ice and tap water. If you are unsure whether or not it is time to replace your filter, our staff at Appliance Repair Near Me can help guide you through the process.